company history contacts links



CONDENSER LINES





HOME


injection moulds

tube straightening machines

serpentine bending machine

condenser and evaporators machine

tube winding machines

refrigerator's door gaskets machines

foaming mask

handling line


VERSIONE ITALIANA



FIN MACHINE

The fin machine is studied to produce, with particular rollers, a fin plate that is one of the necessary components to realize the condenser refrigerator.

The shape usually used is the traditional one, i.e. with fins, but in case of necessity, can be realized different shapes.

The machine is prepared to receive the plate in coils; the coil is inserted manually in the machine while the production cycle is completely automatic.

According to the production necessity, it is possible to produce one or two fin plates contemporaneously.
The feeding of the plate is with motor. The control of the measure can be done with sensor or, if it is required a higher precision, through encoder. In this case the measure will be set with a control board.

The cut of the plate is done with cutting dies properly shaped and moved by little hydraulic presses.

The machine can be equipped with manual or automatic unloader, to be realized according to the specific exigencies of the customer.



BRACKET MACHINE

The bracket machine is studied to produce, with particular rollers, a plate strip properly shaped in order to obtain the bracket of the condenser refrigerator.

The profile of the bracket is realized through profile rollers, usually six passages of rollers are enough to realize a bracket, in any case we are able to design and realize different solution to solve any request.

The machine is prepared to receive the plate in coil, which is inserted manually into the machine while the production cycle is completely automatic.

According to the production necessities, it is possible to produce one or two plate strips contemporaneously. The feeding is with brushless motors, controlled by a CNC system that assure high precision.

For slots punching and cutting are used cutting dies properly shaped and moved by little hydraulic presses. The machine and dies configuration depends from many parameters and require the analysis of the model that must be realized.

It is possible to equip the machine with manual or automatic unloader, to be realized according to the specific exigencies of the customer.



CONDENSER LINE

The "Scarioni condenser" is the fruit of an experience acquired in more than 40 working years, in which we have produced condensers, machines and equipments for condenser production.

The large specialization that result, enable us to include in our offers the most advanced technologies with the top quality and with the best automatic solution that made up-to-date the production of condensers for domestic refrigerators.

The "Scarioni condenser" is a condenser with serpentine "single or double wall" in steel, connected to the sheet with large exchange of surface obtained through of the fins, adequately positioned in order to collect the maximum quantity of air, moved by the natural convective currents.

This condenser present itself solid and compact and guarantee the maximum warm exchange.
One of the most important characteristic is the "chimney effect" the warm air movement inside the condenser from the bottom upwards due to its particular geometric shape.

This characteristic is fundamental above all when the condenser must operate in narrow or closed spaces, for example in the built-in refrigerators.

The support production line is composed by:
One sheets loading group
One profiling machine for grooves shaping
One fin machine for fin forming
One profiling machine for chimney realization
One station for slots punching.

The average production capacity is 5 pieces/minute to reach also 8-10 and more pieces at minute according to the size of support.

Each phase of work is controlled automatically. A special safety program stop everything at the preceding phase of work where is verified the trouble.

This is a line of high productivity that can be lead by only one man.

At the end of the cycle there is the assembling line for the assembling of the serpentine on the fin panel.






SCARIONI Srl Via Per Castelletto, 19 - 20080 Albairate (Mi) ITALY
Tel 0039 02 9406736 Fax 0039 02 94920058
e-mail: info@scarioni.org
Partita IVA 09394810155




homepage